REGUALER 350-401 UPDATE, FREE 350-401 SAMPLE

Regualer 350-401 Update, Free 350-401 Sample

Regualer 350-401 Update, Free 350-401 Sample

Blog Article

Tags: Regualer 350-401 Update, Free 350-401 Sample, Latest 350-401 Exam Online, Reliable 350-401 Exam Review, 350-401 Reliable Test Bootcamp

2025 Latest Lead1Pass 350-401 PDF Dumps and 350-401 Exam Engine Free Share: https://drive.google.com/open?id=1m34JCZYAa_3yQUMw-MVTLmrPVv1KabNm

The 350-401 study guide provided by the Lead1Pass is available, affordable, updated and of best quality to help you overcome difficulties in the actual test. We continue to update our dumps in accord with 350-401 real exam by checking the updated information every day. The contents of 350-401 Free Download Pdf will cover the 99% important points in your actual test. In case you fail on the first try of your exam with our 350-401 free practice torrent, we will give you a full refund on your purchase.

Cisco 350-401 Certification Exam is a critical certification for IT professionals who want to demonstrate their mastery of enterprise network technologies. 350-401 exam covers a wide range of topics, including network automation, network security, and network design. Individuals who pass the exam can demonstrate their expertise in network engineering and gain a competitive advantage in the job market.

>> Regualer 350-401 Update <<

Free 350-401 Sample | Latest 350-401 Exam Online

Purchasing our 350-401 training test is not complicated, there are mainly four steps: first, you can choose corresponding version according to the needs you like. Next, you need to fill in the correct email address. And if the user changes the email during the subsequent release, you need to update the email. Then, the user needs to enter the payment page of the 350-401 Learning Materials to buy it. Finally, within ten minutes of payment, the system automatically sends the 350-401 study materials to the user's email address. And then you can quickly study and pass the 350-401 exam.

Cisco 350-401 ENCOR certification exam is a 120-minute exam that consists of 90-110 questions. The questions are a combination of multiple-choice, drag-and-drop, and simulation-based questions. 350-401 exam is computer-based and can be taken at any Pearson VUE testing center around the world.

Cisco 350-401 (Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)) exam is a comprehensive test designed to validate the knowledge and skills of IT professionals in enterprise networking technologies. 350-401 Exam is intended for individuals who are interested in pursuing a career as a network engineer, network administrator, or technical support specialist. It is also suitable for professionals who want to enhance their existing skills in enterprise networking technologies.

Cisco Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Questions (Q12-Q17):

NEW QUESTION # 12


Refer to the exhibit. Which configuration must be implemented to establish EBGP peering between R1 and R2?

  • A. Option A
  • B. Option C
  • C. Option B
  • D. Option D

Answer: A


NEW QUESTION # 13
Refer to the exhibit.

Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP?
A)

B)

C)

D)

  • A. Option A
  • B. Option C
  • C. Option B
  • D. Option D

Answer: A

Explanation:
Explanation
With BGP, we must advertise the correct network and subnet mask in the "network" command (in this case network 10.1.1.0/24 on R1 and network 10.2.2.0/24 on R2). BGP is very strict in the routing advertisements. In other words, BGP only advertises the network which exists exactly in the routing table. In this case, if you put the command "network x.x.0.0 mask 255.255.0.0" or
"network x.0.0.0 mask 255.0.0.0" or "network x.x.x.x mask 255.255.255.255" then BGP will not advertise anything.
It is easy to establish eBGP neighborship via the direct link. But let's see what are required when we want to establish eBGP neighborship via their loopback interfaces. We will need two commands:
+ the command "neighbor 10.1.1.1 ebgp-multihop 2" on R1 and "neighbor 10.2.2.2 ebgpmultihop
2" on R1. This command increases the TTL value to 2 so that BGP updates can reach the BGP neighbor which is two hops away.
+ Answer 'R1 (config) #router bgp 1
R1 (config-router) #neighbor 192.168.10.2 remote-as 2
R1 (config-router) #network 10.1.1.0 mask 255.255.255.0
R2 (config) #router bgp 2
R2 (config-router) #neighbor 192.168.10.1 remote-as 1
R2 (config-router) #network 10.2.2.0 mask 255.255.255.0
Quick Wireless Summary
Cisco Access Points (APs) can operate in one of two modes: autonomous or lightweight
+ Autonomous: self-sufficient and standalone. Used for small wireless networks.
+ Lightweight: A Cisco lightweight AP (LAP) has to join a Wireless LAN Controller (WLC) to function.
LAP and WLC communicate with each other via a logical pair of CAPWAP tunnels.
- Control and Provisioning for Wireless Access Point (CAPWAP) is an IETF standard for control messaging for setup, authentication and operations between APs and WLCs. CAPWAP is similar to LWAPP except the following differences:
+CAPWAP uses Datagram Transport Layer Security (DTLS) for authentication and encryption to protect traffic between APs and controllers. LWAPP uses AES.
+ CAPWAP has a dynamic maximum transmission unit (MTU) discovery mechanism.
+ CAPWAP runs on UDP ports 5246 (control messages) and 5247 (data messages) An LAP operates in one of six different modes:
+ Local mode (default mode): measures noise floor and interference, and scans for intrusion detection (IDS) events every 180 seconds on unused channels
+ FlexConnect, formerly known as Hybrid Remote Edge AP (H-REAP), mode: allows data traffic to be switched locally and not go back to the controller. The FlexConnect AP can perform standalone client authentication and switch VLAN traffic locally even when it's disconnected to the WLC (Local Switched). FlexConnect AP can also tunnel (via CAPWAP) both user wireless data and control traffic to a centralized WLC (Central Switched).
+ Monitor mode: does not handle data traffic between clients and the infrastructure. It acts like a sensor for location-based services (LBS), rogue AP detection, and IDS
+ Rogue detector mode: monitor for rogue APs. It does not handle data at all.
+ Sniffer mode: run as a sniffer and captures and forwards all the packets on a particular channel to a remote machine where you can use protocol analysis tool (Wireshark, Airopeek, etc) to review the packets and diagnose issues. Strictly used for troubleshooting purposes.
+ Bridge mode: bridge together the WLAN and the wired infrastructure together.
Mobility Express is the ability to use an access point (AP) as a controller instead of a real WLAN controller. But this solution is only suitable for small to midsize, or multi-site branch locations where you might not want to invest in a dedicated WLC. A Mobility Express WLC can support up to 100 Aps


NEW QUESTION # 14
Refer to the exhibit.

An LACP port channel is configured between Switch-1 and Switch-2, but It falls to come up. Which action will resolve the issue?

  • A. Configure Switch-2 with channel-group mode desirable.
  • B. Configure Switch-1 with channel-group mode on.
  • C. Configure SwKch-2 with channel-group mode auto
  • D. Configure Switch-1 with channel-group mode active

Answer: D

Explanation:
The issue with the LACP port channel not coming up between Switch-1 and Switch-2 is due to both switches being configured with "channel-group mode passive". For an LACP (Link Aggregation Control Protocol) to establish a connection, at least one end must be configured to actively seek the establishment of a channel, which is done by setting "channel-group mode active". In this case, configuring Switch-1 with "channel-group mode active" will initiate the LACP negotiation process, allowing the port channel to come up.


NEW QUESTION # 15
Which function does a fabric wireless LAN controller perform In a Cisco SD-Access deployment?

  • A. performs the assurance engine role for both wired and wireless clients
  • B. is dedicated to onboard clients in fabric-enabled and nonfabric-enabled APs within the fabric
  • C. coordinates configuration of autonomous nonfabric access points within the fabric
  • D. manages fabric-enabled APs and forwards client registration and roaming information to the Control Plane Node

Answer: D

Explanation:
Explanation
Fabric Enabled WLC:
Fabric enabled WLC is integrated with LISP control plane. This WLC is responsible for AP image /Config, Radio Resource Management, Client Session management and roaming and all other wireless control plane functions.
For WLC Fabric Integration:
* Wireless Client MAC address is used as EID
* It inform about Wireless MAC address with its other information like SGT and Virtual Network Information
* VN information is mapped to VLAN on FEs
* WLC is responsible for updating Host Database tracking DB with roaming information


NEW QUESTION # 16
Drag and Drop Question
Drag and drop the characteristics from the left onto the correct routing protocol types on the right.

Answer:

Explanation:


NEW QUESTION # 17
......

Free 350-401 Sample: https://www.lead1pass.com/Cisco/350-401-practice-exam-dumps.html

P.S. Free & New 350-401 dumps are available on Google Drive shared by Lead1Pass: https://drive.google.com/open?id=1m34JCZYAa_3yQUMw-MVTLmrPVv1KabNm

Report this page